Recently amateur radio astronomer Jim Brown used an RTL-SDR dongle together with a Ham-it-up upconverter and preamp to capture noise bursts from the planet Jupiter. Not much information about his observations are available yet as he has not yet made a write up, but he has given the image of the noise burst shown below to Jim Sky, programmer of RTL Bridge and Radio-Sky Spectograph which is some of the software used to capture the noise bursts. We will make another post in the future if Jim Brown does a write up.
Jim Sky has also updated his RTL Bridge software to use Oliver Jowetts patched drivers, which allow the RTL-SDR to receive below its usual 24 MHz limit.
The post Capturing Noise Bursts from Jupiter with an RTL-SDR appeared first on rtl-sdr.com.